BallistiX Squire offers ultimate protection for tile, porcelain, terrazzo, stone, grout, and stained concrete, guarding against staining, microbial growth, and UV fading.

BallistiX Squire Coating - Gloss

  • Pint
  • 1000 square feet per gallon
  • This product protection against spalling, pitting, erosion, and chemical damage
(No reviews yet) Write a Review
SKU:
GC-BAL-SQUIRE
$47.00 - $93.00

Request a Quote or a Sample

Product Details

BallistiX Squire is a silicon-ceramic treatment designed to provide maximum protection to tile, porcelain, terrazzo, stone, grout, and stained concrete, against staining, microbial growth, and fading due to UV exposure. It restores the surfaces to near original color and gloss and brings out the color in stone and grout. Its extreme hydrophobic nature exhibits an increased co-efficient of friction on the substrate it is applied to, making the coated surface not slippery when wet.

Features & Benefits of BallistiX Squire Coating - Gloss

  • High-Gloss Finish: Achieves a stunning, reflective surface that improves the aesthetic appeal of any space.
  • Durable & Resilient: Protects against wear, scratches, and impact, making it perfect for high-traffic areas.
  • Chemical Resistance: Shields your floors from damage caused by chemicals, oils, and spills, making it ideal for garages, workshops, and commercial spaces.
  • UV Protection: Provides superior protection against UV rays, preventing fading and discoloration over time.
  • Easy to Apply: Designed for simple DIY application, with clear instructions and all necessary materials included in the kit.
  • Fast Drying: The coating dries quickly, allowing you to enjoy your newly improved floors in no time.

How to Apply BallistiX Squire Coating - Gloss

Applying our BallistiX Squire Coating - Gloss is simple and effective. Follow these basic steps to achieve a flawless finish:

  1. Surface Preparation: Clean the surface thoroughly, removing any debris, oil, or old coatings. Make the area dry and free from contaminants.
  2. Mixing: Stir the coating well before application to check an even consistency.
  3. Application: Use a high-quality roller or brush to apply the coating evenly across the surface. Work in manageable sections to avoid overlaps and make a consistent finish.
  4. Drying Time: Allow the coating to dry according to the manufacturer’s recommendations. Avoid foot traffic or heavy use until the coating is fully cured.

Get in Touch with Us

Ready to experience the exceptional protection and stunning finish of BallistiX Squire Coating - Gloss? Our team at ArmorPoxy helps you with any questions, provide guidance and in placing your order. Our dedicated customer service team is committed to make sure that you receive the best products and support for your coating needs.

Specifications

Dimensions

Details

Additional Info

FAQ

BallistiX products offer protection against spalling, pitting, erosion, and chemical damage. This product line also prevents mold and mildew, is anti-graffiti, and enhances the color of the floor beneath it. After applying our product, your floors will also require less maintenance, and cleaning time can be cut by as much as 50%!

This silicon-ceramic treatment provides protection to porcelain, terrazzo, stone, grout, and stained concrete surfaces.

BallistiX products cover about 1000 square feet per gallon, which is 250 square feet per quart and 125 square feet per pint.

Most applications first require cleaning the surface with our 99% isopropyl alcohol on microfiber mop. If you would like to additionally prepare your floor, you may use a floor buffer and the proper pad for the application sold by ArmorPoxy. The product can then be applied with a roller, brush, or the most commonly used spray equipment. Please consult the Technical Data Sheet above for further application instructions.

First pour bottle B into the A bottle and shake for 20 seconds. Set the bottle down and loosen the cap to allow alcohol vapors to escape. If the temperature is less than 135 degrees Fahrenheit after 5 minutes, shake the bottle again. After the bottle has sat for 30 minutes, shake it again for 20 seconds. After about 60-90 minutes, when the temperature has fallen below 100 degrees Fahrenheit, add part C and shake the mixture for 20 seconds. Let the bottle sit for 5 minutes before applying the 3-component solution to your floor.

Resources

SDS
Download pdf
Related Products
BallistiX NCO provides top-tier protection for tile, porcelain, terrazzo, stone, grout, and stained concrete. It shields against staining, microbial growth, and UV fading.
BallistiX NCO Coating - Semi-Gloss
$41.00 - $280.00
BallistiX Ranger restores the surfaces to near original color and gloss and brings out the color in vinyl.
BallistiX Ranger Coating
$109.00 - $659.00
STEALTH COAT designed as a premium product often times utilized in high-end applications.
BallistiX Stealth
$101.00 - $339.00
This technology was created primarily for installation on hard surfaces.
BallistiX Counter Attack
$119.00 - $349.00
BallistiX Single Component coating offers max-level protection with an extremely easy approach.
BallistiX Single Component
$119.00 - $349.00
Gallon of BallistiX Black label, coating and sealer
BallistiX - Black Label
$149.00 - $349.00
Ballistix Flow Agent Grenade Pack (Is mixed with Squire or NCO.
BallistiX Grenade Flow Pack
$25.00
BallistiX Satin Grenade Pack is used to achieve a satin/matte finish.
BallistiX Satin Grenade Pack
$20.00
BallistiX Applicator Pad 18
BallistiX Applicator Pad 18"
$8.99

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

Call: (888) 755-7361
Fax: (888) 755-6231

International

Call: (908) 810-9613
Fax: (908) 453-8114

Opening Times & Location

9 - 5 EST Monday - Friday
1260 North Ave., Plainfield NJ 07062, US
!