NON SKID PRODUCTS
Armorpoxy offers a wide range of skid reducing solutions for almost any application!
PLEASE NOTE THAT THESE PRODUCTS INCREASE TRACTION IN MANY APPLICATIONS BUT IT IS THE USER’S RESPONSIBILITY TO ASSURE PROPER COMPLIANCE WITH ALL STATE, FEDERAL AND LOCAL LAWS TO ASSURE PROPER FOOTING AND A SAFE ENVIRONMENT. ADDITIONAL METHODS SUCH AS MATS, RAILS OR OTHER SAFETY DEVICES/METHODS, MAY BE REQUIRED TO PREVENT INJURIES DUE TO SLIPPERY SURFACES. ARMORPOXY MAKES NO REPRESENTATION OR WARRANTIES PREVENTING PERSONAL INJURY.
ARMORSTONE – ArmorStone liquid ‘Stone in a Can’ is a phenomenal product that beautifies and protects, while offering a superb non-skid coating on most any surface. Easy to apply, can be made to look like tile, stone, cement, and much more. Standard off-white in color, can be tinted to match almost any color you desire. ArmorStone consists of 3 layers of easy one-part (no mixing) material. So simple a child could install it!
ARMORTEX ONE PART NON SKID COATING – ArmorTex is a unique one part acrylic textured coating. Can be applied to concrete, wood and most other surfaces. Can be applied to previously painted surfaces and is several times more durable than just paint alone. Neutral in color, can be tinted with any standard latex paint. Oil, chlorine and UV resistant. Excellent, economical, solution for commercial applications, stairs, decks and similar applications. Hides minor surface imperfections. Coverage 150 sq. ft/gal. Dry time approx 4 hrs. Available in 2 gal and 5 gal sizes. We recommend topcoating with ArmorTex Wet Look Sealer for additional life, shine and UV protection.
ARMORPOXY II/ARMORULTRA NON SKID SYSTEMS – Our industrial-grade Armorpoxy II and ArmorUltra can be made even more durable and less slippery by the addition of our UltraWear Non Skid Additive. Add one pint per gallon to the final ArmorUltra Topcoat when applying. For even greater slip resistance we offer #30 and #60 silica grit additives that get sprinkled into the Armorpoxy and then get ‘sealed in’ with our ArmorUltra Topcoat.
ARMORSTRIP STAIR/WALKWAY STRIPS – ArmorStrip non skid stair strips are industrial-grade self adhesive strips that can be applied to most any surface. We stock black mineral abrasive strips in 2″, 4″ and 6″ widths, and cut to length. Custom sizes, colors, glow-in-the dark, and other options are available special order.
ARMORSTEP STAIR STEPS – Our aluminum stair treads are the ideal way to resurface your stairs and make them amazingly safe and secure. Heavy-duty extruded aluminum treads get screwed onto your existing stair treads. Extruded channels in the treads are filled with an epoxy/mineral aggregate that carries a lifetime warranty! Stock and custom colors are available. We defy you to wear these out! Meets all OSHA requirements for stair safety. Available in 9″ and 11″ depths. Custom ordered to your width requirements. Lead times 2-3 weeks.
ARMORSTEP METAL TREADS – Resurface your stair tops and make them slip resistant at the same time. Extremely heavy duty extruded aluminum with filled channels of epoxy/mineral aggregate. Pre-drilled for easy installation. Standard 5.5″ width. 3″ & 7″ widths available. Sold by the foot. Tell us how many total feet you want and the length of each tread as they come cut and ready to install. OSHA approved. Lifetime warranty. Standard colors gray, black, white, yellow, green, blue, red and brown. Custom colors and glow in the dark visibility lines are available at add’l charge. Lead times 2-3 weeks, rush service available.
ARMORPOXY NO SLIP SURFACE ETCH– Unique clear product treats surface of any non-porous tile, slate, fiberglass, etc to make less slippery. Use around pools, showers, locker rooms, child areas, walkways, etc. Simply apply, wait 5-15 minutes, then rinse off. Does not make the surface gritty or hard to clean. Available in 1 gallon and 4 oz (for bathtubs and small areas) sizes.
CLEAR GRIP NON SKID ADDITIVE – Unique micronized polymeric lightweight plastic aggregate grit to make your surfaces less slippery. Works great with clear coatings to aid in traction. It adds a slight texture to the finish without changing color. Excellent resistance to chemicals and detergents and helps to extend surface life for longer wear. Can be used for water based or solvent based products. Add one pack per gallon. If using multiple coats, add to final coat. Not for use with water repellents or silicones.