Armortrak polyurethane flexible coating with optional self-contained recycled rubber granules for an attractive tough textured finish. When exposed to atmospheric moisture, Armortrak undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is also available in a smooth version without the rubber granules. Both Armortrak (indoor version) and Armortrak 18-Ox (outdoor version) may be used for indoor and outdoor applications. However, as Armortrak may experience some degree of fade in outdoor applications, Armortrak 18is recommended for maximum UV protection under these conditions. Armortrak is currently used by the US Navy on many of their boat decks under the harshest of environments.

Armortrak is a tough, single-pack, totally flexible, slip-resistant, waterproof protective urethane coating. Armortrak will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and sound-painted materials. Some metal and extremely porous surfaces may need to be primed. Armortrak can be applied by roller, brush or spray. Armortrak can give a relatively smooth or rough surface, depending on application technique.

USES: Armortrak has many applications for commercial, military and civilian use.  Armortrak protects surfaces from foul weather elements and harsh chemicals, while creating a nonslip surface on: pedestrian walkways/truck beds/ramps and loading docks/bridges/metal and wooden steps/catwalks/ship decks/marine applications/pleasure boats/storage tanks/floors/handicap ramps/pools and spas/sealing rusty pipes/playgrounds/freight elevators/tool handles/roofing/vehicle undercoating/curb ramps/parking lots. Ideal for boat decks and roofs, patios, steps, walkways, pool decking and thousands of other uses.

ADVANTAGES:  Foot traffic in 6 to 12 hours, Economical, Lasts for years; no need to remove old product when recoating- Weight per gallon, pounds 10, Percent solids by weight 75.8%

Armortrak is a one-part coating so no mixing of components is required. Armortrak Coating is totally flexible, highly resistant to chipping, flaking or peeling. If necessary, Armortrak is repairable and can be re-coated because the coating bonds to itself. Armortrak is water resistant, resistant to acid, chemicals, UV exposure, and salt water. Armortrak is a fast drying coating and requires only a very short inter-coat time (3-4 hours between coats).