HARD/GLAZED SURFACE PRIMER

Description

Special 2-part water based epoxy bonding primer can be used when desiring to apply coatings to hard surfaces like tile, glazed surfaces, polished and burnished concrete and similar difficult to coat surfaces. Designed to be used as a primer for Armorpoxy 100% solids products (ArmorUltra & Armorclad plus certain specialty products).  Hard Surface Primer has tenacious bonding properties and allows coating of surfaces that were previously non-coatable.

NOTE: All surfaces should be prepped by etching with minimum 50% dilution muriatic acid, or light grinding or sanding.

Water-based, zero VOC’s. Simply pour the part B activator into the Part A can, mix well and apply. Medium gray in color. Makes one gallon when mixed.

Coverage approximately 250 sq. ft/gal.

AC-ARMSC550X

  • TECHNICAL DATA HARD SURFACE EPOXY PRIMERDownload
Other Tech Documents  

You may also like…