• Home
  • Products
  • Armorultra ArmorTallic 600 Sq. Ft. Gal Metallic Epoxy Complete Floor Kit 100% Solids

Color has been changed to

close

Armorultra ArmorTallic 600 Sq. Ft. Gal Metallic Epoxy Complete Floor Kit 100% Solids

$1399.00

Gray Primer w/ ArmorTallic [Dolphin] 100% Solids Low Viscosity

Description

Create endless patterns with the ArmorTallic metallic epoxy kit! We offer 48 color options, and your floor patterns can be even further customized depending on your application technique. This master kit covers 600 square feet, about the size of a standard 2-car garage. No additional materials required. Coverage depends on surface porosity.

Description

Create endless patterns with the ArmorTallic metallic epoxy kit! We offer 48 color options, and your floor patterns can be even further customized depending on your application technique. This master kit covers 600 square feet, about the size of a standard 2-car garage. No additional materials required. Coverage depends on surface porosity.
Product code: COM-AU1_5KIT-1-1-1
Shipping Weight: 60 lbs.

Description

Complete kit of metallic epoxy system. Includes material for 600 sq ft or a standard 2-car garage.

Create endless patterns and finishes with ArmorTallic Armorultra kit. This metallic epoxy kit contains:  Prep/etch concentrate, two gallons of contrasting color 2-part epoxy primer, 4 gal of clear ArmorUltra 100% solids epoxy part ‘A’ & 2 gal of part ‘B’ (total 6 gal 100% solids epoxy), plus  24 oz. container of pre-measured metallic shimmer pigment. Once you pigment the Part A you can mix as much as you need (just hold the 2:1 mix ratio constant with the Part B) so you don’t have any waste. Kit also includes clear 1-part ARM356X Military Grade protective topcoat, Armorgrip nonskid additive, metal drill mixer,  mixing stick, etch solution, brush, and 3 roller pads.

ArmorTallic can be mixed with other metallic color powders  to create endless patterns and designs giving you a truly unique metallic epoxy finish.

Coverage results vary with surface porosity, floor texture and application methods and technique. Heavier applications and rougher surfaces will yield less coverage.

Priming with Armorultra or Armorpoxy II contrasting color (normally black) primer is required. After applying use the matching ArmorUltra 2-part Topcoat.

 

Click the chart below for ArmorTallic colors

ArmorTallic Colors

SKU: COM-300 METALLICKIT

ArmorTallic Install Demo

You may also like…

FAQ

What comes with the ArmorTallic 600 square foot Epoxy Kit?
This kit comes with two gallons of 2-part epoxy primer, 6 gallons of 2-part solids epoxy, a 24-ounce container of metallic shimmer pigment, a 1-part Military grade Topcoat, Armorgrip nonskid additive, acid etch solution, a metal drill mixer, a mixing stick, a brush, and 3 roller pads.
Do I need to use a primer to apply this product?
Yes, we suggest priming with an ArmorUltra or ArmorPoxy II primer that contrasts your choice of ArmorTallic epoxy color (usually black).
What colors are ArmorTallic Epoxy kits available in?
Ranging from caviar black to banana yellow, ArmorTallic Epoxy Flooring Kits come in 48 colors, each of which are equally priced.
How should I mix my solid epoxy?
This epoxy kit comes with four gallons of 'A,' and two gallons of 'B' solution, which should be mixed together slowly in a 2:1 ratio.