SupraTile Interlocking Edging - 4 Pack
Product Details
Supratile matched interlocking edging. Available in ‘straight’ which match up with a single tile edge, or ‘corner’ which has an extension creating a ‘miter look’ clean joint on corners. In the photo the piece on the left is a ‘straight’ and the piece on the top is a ‘corner’
Sold in 4 packs only. Each piece is approximately 2 1/2″ deep x length of your tile and creates a smooth transition ramp. Teeth can be cut off and glued flush against tiles if needed at a point where teeth have been removed for trimming/fitting. To calculate how many packs you need, take the number of inches that you need and divided by the size of your tile (20″ for 4mm Dovetail, 20.5″ for 4.5mm, 6.5mm and 7mm), this gives you the number of pieces you need, and then round that number into the number of 4-packs you need.
Please note that interlocking edging is not available for either the Hidden Joint series, please contact us for glue-0n edging options.
Installation note: Edging is manufactured from different batch lots than tiles and may require heating with a heat gun or similar to soften the edging temporarily to assure proper fit and alignment. Inexpensive heat guns can be purchased locally at home centers or online.
