Free Shipping

Armor Renew Wood & Concrete Resurfacer

  • Concrete and wood resurfacing coating
  • Easy to use, for foot traffic areas
  • For patios, sidewalks, balconies, pool decks and more
(No reviews yet) Write a Review
SKU:
OD-RENEW
Selected Color is
$69.00 - $399.00

Product Details

FREE SHIPPING! Heavy Duty Deck or Patio Coating – LASTS A LIFETIME!

Armor Renew is a specially formulated environmentally-safe textured liquid coating that you apply to virtually any concrete surface to bring it back to life, and avoid expensive replacement. Armor Renew is not a paint or stain, but a 1-part (no mixing) water based thick coating that is designed to be applied to wood or concrete surfaces with surface imperfections and damage caused by moisture, UV, cracks, mold and discoloration. Acts a liquid resurfacing coating that ’sits’ on the surface but adheres tenaciously (unlike stains or paints that soak in, and epoxies that are not UV stable) and provides a brand new slip-resistant surface. Gives the effect of replacing at a fraction of the cost. Great for patios, stairs, walkways, wood or concrete decks, balconies, etc. Each gallon covers approximately 50-100 square feet per coat. Lighter colors and older/more porous wood can yield less coverage. 2 coats are required for proper performance and warranty coverage. Please note that it is mandatory to use our special textured foam roller pad to apply (see below). Lifetime satisfaction warranty. ‘Smooth’ high solids acrylic version is available for painting wood uprights,stairs and between boards.  Available in 20 gorgeous colors (color charts available).

Armor Renew Wood Primer (see related items below) is required for all applications to wood in order to obtain the lifetime warranty.

Use our Flash Bond Prime for composite (Trex type) decking.

ArmorRenew Sample Kit Contains:

  • (1) QUART ARMOR RENEW COATING
  • (1) 3″ ROLLER HANDLE (The handle can also be attached to a broomstick for ease of use. Test out the product to see how truly fantastic it is!)
  • (1) 3″ ARMOR RENEW ROLLER PAD
  • (1) 4″ PAINT TRAY

Not recommended for areas that have standing water or where water does not drain properly. Contact our office for coatings for these types of areas. Pail contents 3.75 gals if not tinted, 4 gals with tint.

PLEASE NOTE THAT ARMOR RENEW IS MADE IN BATCHES. COLORS MAY VARY FROM BATCH TO BATCH SO PLEASE MAKE SURE TO ORDER ENOUGH MATERIAL FOR YOUR ENTIRE PROJECT SINCE REORDERS MAY SHOW COLOR VARIATIONS. (If this color shift does occur, it can be corrected by putting on a coat of the Smooth Version).

Specifications

Dimensions

Container Size

2 Gal, 4 Gal

Product Thickness

20 Mils

Details

Indoor / Outdoor

Indoor / Outdoor

Commercial / Residential

Commercial / Residential

Approx Coverage

50-100 sq ft per gallon

Coating Type

1-part coating

Rec Coat Number

2

Substrate/Surface Material

Wood, concrete

Dry To Touch Time

4-6 hours

Time before Recoating

24 hours

DIY Friendly

Yes

UV Resistant

Yes

Indoor / Outdoor

Outdoor

VOC

<50 g/l (0.42lbs./gal.)

Solids By Volume

51.3%

Storage

Protect from freezing.

Shelf Life

3 Years

Additional Info

Videos

Installation Overview

Color

Adirondack Green
Black
Blue Reef
British Khaki
Camel
Canyon Rock
Chesapeake Sunset
Cobblestone
Cypress
Espresso
Island Sand
Kilim Red
Mesa Sunrise/ Driftwood
Nantucket Gray
Riverstone
Santa Fe Red
Sunwashed Blue
Tudor Brown
Wrought Iron
White

Resources

TDS & Instructions - Smooth
SDS - Smooth
TDS & Instructions - Textured
SDS - Textured

FAQ

ArmorRenew allows you to restore wood or concrete floors at a significantly lower price than a replacement would cost. ArmorRenew also provides a slip-resistant surface that is safer to walk on than worn-down decks.

ArmorRenew offers 20+ colors, which range from a dark Canyon Rock to the flamboyant Chesapeake Sunset. Each color is unique for any project.

Yes, it's a one part product and very easy to work with!

We highly suggest you use our Renew Textured Foam Roller Pads to apply two coats of your ArmorRenew product.

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

International

Opening Times & Location

9 - 5 EST Monday - Friday