ArmorPoxy Heavy-Duty Textured Non-Skid Epoxy is designed to provide slip-resistant, durable, and long-lasting protection for industrial, commercial, and high-traffic areas. It is ideal for warehouses, ramps, loading docks, garages, and walkways where safety and traction are crucial. Proper application ensures maximum adhesion and performance.
ArmorPoxy Experts demonstrates how to effectively apply the ArmorPoxy Heavy Duty Textured Non Skid Epoxy on surface in Step by Step guide.
Step 1: Surface Preparation
-
Remove dirt, grease, oil, and any contaminants using a degreaser or industrial cleaner.
-
For concrete, use an etching solution or mechanical grinding for better adhesion.
Step 2: Mixing the Epoxy
-
ArmorPoxy’s non-skid epoxy typically comes in a two-part formula (resin & hardener).
-
Mix according to manufacturer instructions (usually a 1:1 or 2:1 ratio)
Step 3: Stir Thoroughly:
-
Use a mechanical mixer or drill paddle for at least 3-5 minutes to ensure uniform consistency.
Step 4: Application Process
-
Use a roller (3/8” or 1/2” nap) or squeegee for even coverage.
-
For a heavier texture, apply the epoxy with a trowel or squeegee and backroll with a roller.
-
Work in sections to maintain a wet edge and avoid lap marks.
Step 5: Maintenance & Longevity
-
Regular Cleaning: Use a mop, pressure washer, or mild detergent to maintain texture.
-
Avoid Harsh Chemicals: Acidic or abrasive cleaners can degrade the coating over time.
-
Periodic Inspections: Reapply topcoats in high-wear areas to extend life expectancy.
