ArmorPoxy Wet Surface Epoxy is the ultimate solution for challenging coating applications on wet and underwet surfaces. This innovative, cycloaliphatic epoxy coating is designed to use in environments where traditional coatings fail. 

Whether it is sweating pipe, racks or underwater applications, ArmorPoxy Wet Surface Epoxy delivers superior performance making it perfect go-to choice for professional. Here Armorpoxy expert demonstrate how to apply this Epoxy in effective way. 

Step 1: Mix the Epoxy

  1. It's a two-part epoxy, mix Part A (resin) and Part B (hardener) in the recommended ratio.

  2. Stir thoroughly for at least 3-5 minutes until the mixture is uniform.

 

 

Step 2: Application Process

A. Apply to Wet or Submerged Surfaces:

  1. Use a stiff brush, roller, or gloved hand to apply the epoxy.

  2. Press it firmly into the surface to displace water and ensure proper adhesion.

apply-directly.png

B: Thickness and Coverage:

  1. Apply in a uniform layer, ensuring full coverage.

  2. If additional thickness is needed, wait for the first layer to become tacky before adding another coat.



Step 3: Drying & Curing

  1. Initial Set: Typically, within a few hours, depending on temperature and humidity.

  2. Full Cure: May take 24-48 hours, with maximum hardness achieved in 5-7 days.

  3. Underwater Cure: If applied underwater, it will cure fully within a few days, maintaining strong adhesion.





 Step 4: Maintenance & Longevity

  1. Regular cleaning with non-abrasive cleaners helps maintain the coating.

  2. Periodic inspections ensure durability in high-moisture environments