Polyaspartic - 85% Solids - 2 Gal Clear / Colored

  • Super fast drying polyaspartic
  • Indoor/Outdoor approved. UV tolerant.
  • High chemical and abrasian resistance
(No reviews yet) Write a Review
SKU:
GC-ARMPOLY85
Selected Color is
$299.00 - $324.00

Product Details

ArmorPoxy polyaspartic is a two component high solids polyaspartic clear topcoat with excellent chemical resistance, UV stability, abrasion resistance, hardness, used as basecoat or topocat over epoxy floor coatings, metallics epoxy, and more. The Polyaspartic comes packed in a 3.5 Gal Bucket with a metal mixer for ultimate convenience!  2 gallon size. Cures in 4-6 hours and can handle vehicle traffic in 48 hours. This high-solids coating has an extended cure time and still allows a quicker return to service than epoxy and urethane, Working time 15-20 minutes depending on temperature.  

High sheen finish that is resistant to UV rays and chemical damage, low maintenance, self priming, impermeable to mold, and other high moisture areas. It is ideally suited for both commercial and residential settings, aircraft hangars, manufacturing facilities, warehouses, retail stores, automotive showrooms, garage floors, or any high traffic area where an exceedingly resilient floor is desired.

Clear, high gloss, UV stable/does not yellow,  can be used outdoors. Can be used as a base coat, mid-coat (for adding decorative flecks), or a topcoat. Easily field tinted with available tint packs, please call or email for pricing. Coverage 300-700 square feet per 2 gallons depending on surface texture, porosity, etc. Typical Coverage averages 500 square feet per 2 gal set.

 Tint the polyaspartic with our tint packs. 1 Pint (160z) of tint per 1.5-2 gallons of polyaspartic or 1 Quart (32 oz) per 3-4 gallons of polyaspartic

Each set comes with 1 gallon of Part A, and one gallon of Part B and if colored a colored tint pack. Non skid additives can be added to or broadcast in as required for slip reduction. Larger sizes available for commercial projects, plus we can make into our Job on a Pallet Kits, call or email for info.

Specifications

Dimensions

Container Size

2 Gal

Details

Indoor / Outdoor

Indoor / Outdoor

Commercial / Residential

Commercial / Residential

Product Contents

Bucket, mixer, polyaspartic

Application/Installation Method

Roller, squeegee, brush on

Coating Type

2-Part Polyaspartic 85% Solids

Min Optimal Temp

40

Max Optimal Temp

90

Sheen

Gloss

Substrate/Surface Material

Concrete

Dry To Touch Time

2-4 hours

Vehicle Ready Time

24 hours

DIY Friendly

Yes

Prevents Hot Tire Pickup

Yes

Resists Blistering

Yes

Resists Cracking

Yes

Resists Peeling

Yes

UV Resistant

Yes

Light Foot Traffic

12-24 hours

Additional Info

Short working time <15 minutes

Approx Coverage

150-350 sq ft/gal

Additional Info

Resources

TDS & Instructions

FAQ

Rapid Curing Time: Polyaspartic coatings cure significantly faster than traditional coating materials like epoxy. This rapid curing time reduces downtime for businesses and can allow for the application of coatings in a single day. High Durability: They are known for their high durability and resistance to wear, making them ideal for high-traffic areas. Polyaspartic coatings can withstand heavy mechanical loads, impacts, and abrasion, ensuring a long-lasting finish. Chemical Resistance: These coatings are highly resistant to a wide range of chemicals, including oils, greases, and cleaning agents, making them suitable for industrial environments and areas where chemical spills are common. UV Stability: Unlike some other coatings, polyaspartic coatings are UV stable, which means they will not yellow or degrade under sunlight. This makes them an excellent choice for outdoor applications or areas exposed to natural light. Temperature Flexibility: Polyaspartic coatings can be applied in a broader range of temperatures than many other coatings, making them versatile for different climates and seasons.

Typically in a few hours however, the working time can be as short as 10-15 minutes in hot temperature environments.

Yes! It can be used as a topcoat on epoxy or a topcoat on a base layer of polyaspartic.

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

International

Opening Times & Location

9 - 5 EST Monday - Friday