Name: Armor Liquid Membrane - Liquid Rubber Coating
SKU: OD-ARMMCX
Availability: InStock

Product Details
Specifications
Colors
Videos
FAQs
Technical Support

Request a Quote or a Sample

Product Details

Armor Liquid Membrane is a unique, easy to apply rubber-like coating that can be applied to virtually any surface and creates an incredible water-resistant barrier that prevents water and moisture intrusion.

Ideal for balconies, decks, patios, steps, porches, basements (floors and walls), pools, ponds, and any other surface that needs full water and moisture protection. Armor Liquid Membrane is like a liquid rubber and can be applied to concrete, wood, stone, metal, tile, fiberglass, roofs, RV’s, cladding, blocks and almost any other surface. Can be fully submerged and used below grade. Safe for fish, plants, potable water, and saltwater use! Can be used to hold back water on basement walls up to 10 psi. Ideal for surfaces that are leaking to areas below due to age, cracking, and building movement and areas that are leaking above conditioned spaces or areas below the surface, and to prevent water intrusion. Even leaking pools can be sealed! This product is fully UV stable and can be used for a variety of outdoor applications. This product is designed to be applied in thin multiple coats.

Upgrade the Liquid Membrane system with ArmorShield Polyurethane topcoat (vehicle rated) which can be applied directly over the Liquid Membrane for extra protection. A minimum of 2 coats is recommended.

Leaking tiled decks and balconies…problem solved!

Test a SAMPLE that covers 25 – 50 square feet of the Armor Liquid Membrane!

Armor Liquid Membrane stretches up to 300% without tearing! Will bridge small cracks without issue. Larger cracks can be treated by using along with our Fabric Reinforcement alone or with a combination mixed with sand to create a flexible slurry patch. There is almost no application that cannot be fixed with Armorpoxy Liquid Membrane.

Armor Liquid Membrane is applied with brush, roller or spray. Any type of airless sprayer with a tip size of 17-21 and a PSI of 2500min-3300 max can be used for spraying application. Normally a minimum of two coats are required, and additional coats can be applied for added protection. Low VOC, almost no odor and safe for indoor use. Dries in one hour per coat @ 72 deg F, full curing strength 2-7 days depending on condition. Nonskid aggregate can be broadcast while wet to reduce slippage. We suggest additional coat over aggregate if used.

Armor Liquid Membrane covers 100-150 square feet per gallon on porous surfaces. and 200-250 square feet per gallon on non-porous surfaces. Available in 14 colors including semi-clear. Please note that colors are somewhat translucent, and may require multiple coats to achieve full color coverage. Lead times 7-10 business days. Please ensure to apply this product in thin multiple coats. If applied too thick, the liquid membrane will remain tacky. This product is not meant to be applied in heavy coats. Tacky surfaces with the Liquid Membrane are often a result of the first coat being applied fairly thick as this traps moisture. Since the Liquid Membrane has a very low permeability, it releases moisture very slow. If you apply a thick coat, it dries from top to bottom, meaning the top might feel dry to the touch but the bottom is still wet which results in trapped moisture. This would become worse when you apply a second coat which then adds another layer. To avoid this ensure to apply in mutiple thin coats! Perform a pressure test or thumb imprint prior to proceeding with the next coat to ensure the first coat is dry enough to recoat. If there is no imprint you are good to coat!

NEW** Now available in 5 Gal quantities. For 25+ Gal orders please contact our office for discounted quotes.

Specifications

Dimensions

Container Size

Pint, 1 Gal, 5 Gal

Details

Indoor / Outdoor

Commercial / Residential

Application/Installation Method

Roller, Squeegee, Spray On, Brush On

Water Protection

Yes

Substrate/Surface Material

Wood, metal, concrete, fiberglass

DIY Friendly

Yes

Dry To Touch Time

25 to 30 minutes at 72°F

Min Optimal Temp

50°F

Max Optimal Temp

90°F

UV Resistant

Yes

Water Compatibility

Yes

Time before Recoating

1-2 hours

Coating Type

Waterproofing and anti-fracture membrane

Elongation

1300% elongation

Waterproofing

Excees ANSI 118.10 waterproofing standard. Protects your substrate from long term water damage

Additional Info

Colors

Black

Beige

Biege Tuscan

Blue

Light Blue

Cream

Light Brown

Green

Light Gray

Medium Gray

Orange

Semi-Clear

White

FAQ

Armor Liquid Membrane covers 100-150 square feet per gallon on porous surfaces. and 200-250 square feet per gallon on non-porous surfaces.

Each coat cures in one hour, but full curing strength may be reached anywhere between 2-7 days, depending on external conditions.

Safe for fish, plant produce and saltwater use

Can be applied on Concrete, Wood, Stone, Tiles, Interior&Exterior Cladding, Metal&Aluminium, Drywall boards, ICF blocks, RV Roofs

Yes! It's a one part coating that can be rolled on or sprayed on. Used by thousands of DIYers and professional contractors every year.

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

Call: (888) 755-7361

Fax: (888) 755-6231

International

Call: (908) 810-9613

Fax: (908) 453-8114

Opening Times & Location

9 - 5 EST Monday - Friday

1260 North Ave., Plainfield NJ 07062, US

Armor Liquid Membrane - Liquid Rubber Coating

Write a Review