Armor Liquid Membrane - Liquid Rubber Coating
- Interior/exterior waterproofing coating
- Easy to apply coating
- Anti fracture membrane coating - foot traffic
- SKU:
- OD-ARMMCX
Product Details
Armor Liquid Membrane is a unique, easy to apply rubber-like coating that can be applied to virtually any surface and creates an incredible water-resistant barrier that prevents water and moisture intrusion.
Ideal for balconies, decks, patios, steps, porches, basements (floors and walls), pools, ponds, and any other surface that needs full water and moisture protection. Armor Liquid Membrane is like a liquid rubber and can be applied to concrete, wood, stone, metal, tile, fiberglass, roofs, RV’s, cladding, blocks and almost any other surface. Can be fully submerged and used below grade. Safe for fish, plants, potable water, and saltwater use! Can be used to hold back water on basement walls up to 10 psi. Ideal for surfaces that are leaking to areas below due to age, cracking, and building movement and areas that are leaking above conditioned spaces or areas below the surface, and to prevent water intrusion. Even leaking pools can be sealed! This product is fully UV stable and can be used for a variety of outdoor applications. This product is designed to be applied in thin multiple coats.
Upgrade the Liquid Membrane system with ArmorShield Polyurethane topcoat (vehicle rated) which can be applied directly over the Liquid Membrane for extra protection. A minimum of 2 coats is recommended.
Leaking tiled decks and balconies…problem solved!
Test a SAMPLE that covers 25 – 50 square feet of the Armor Liquid Membrane!
Armor Liquid Membrane stretches up to 300% without tearing! Will bridge small cracks without issue. Larger cracks can be treated by using along with our Fabric Reinforcement alone or with a combination mixed with sand to create a flexible slurry patch. There is almost no application that cannot be fixed with Armorpoxy Liquid Membrane.
Armor Liquid Membrane is applied with brush, roller or spray. Any type of airless sprayer with a tip size of 17-21 and a PSI of 2500min-3300 max can be used for spraying application. Normally a minimum of two coats are required, and additional coats can be applied for added protection. Low VOC, almost no odor and safe for indoor use. Dries in one hour per coat @ 72 deg F, full curing strength 2-7 days depending on condition. Nonskid aggregate can be broadcast while wet to reduce slippage. We suggest additional coat over aggregate if used.
NEW** Now available in 5 Gal quantities. For 25+ Gal orders please contact our office for discounted quotes.