BallistiX products offer protection against spalling, pitting, erosion, and chemical damage. This product line also prevents mold and mildew, is anti-graffiti, and enhances the color of the floor beneath it. After applying our product, your floors will also require less maintenance, and cleaning time can be cut by as much as 50%!

This silicon-ceramic treatment provides protection to porcelain, terrazzo, stone, grout, and stained concrete surfaces.

BallistiX products cover about 1000 square feet per gallon, which is 250 square feet per quart and 125 square feet per pint.

Most applications first require cleaning the surface with our 99% isopropyl alcohol on microfiber mop. If you would like to additionally prepare your floor, you may use a floor buffer and the proper pad for the application sold by ArmorPoxy. The product can then be applied with a roller, brush, or the most commonly used spray equipment. Please consult the Technical Data Sheet above for further application instructions.

First pour bottle B into the A bottle and shake for 20 seconds. Set the bottle down and loosen the cap to allow alcohol vapors to escape. If the temperature is less than 135 degrees Fahrenheit after 5 minutes, shake the bottle again. After the bottle has sat for 30 minutes, shake it again for 20 seconds. After about 60-90 minutes, when the temperature has fallen below 100 degrees Fahrenheit, add part C and shake the mixture for 20 seconds. Let the bottle sit for 5 minutes before applying the 3-component solution to your floor.