Description
Coval Concrete Primer is used as a first coat for the application of Coval Concrete Protector. Establishes a strong covalent bond with the substrate, and it’s effortlessly and swiftly applied using an acetone pump sprayer (carried by Armorpoxy). Can be used on floors, retaining walls, infrastructure, and various precast concrete structures.
This innovative coating creates a strong bond for the matching Coval Concrete Protector.
Recommended for a Range of Surfaces:
- Precast concrete walls & structures
- Polished concrete
- Masonry pavers
- Bricks
- Cement block
- Driveways
- Paths
- Cement overlays
Key Specifications:
- Color: Clear to slight amber to rose (varies with temperature and humidity); always dries clear.
- Finish: Gloss or Satin
- Vehicle Type: Solvent Base
- Flash Point (Penskey-Martens closed Cup): -9°C / 15°F
- VOC (Volatile Organic Compounds): Less than 100 g/L
- Weight per Gallon: 7.36 lb/g
- Semi-breathable: Enhancing durability and performance.
Unleash the potential of Coval Concrete Primer and safeguard your surfaces like never before.
Application Tips:
- Use acetone-proof equipment.
- For satin and matte finishes:
- Shake contents well.
- Remove sprayer filters.
- Maintain PSI and distance.
- Avoid puddling.
- Practice on mockups if needed.
- Apply one coat unless required otherwise.
- For rough surfaces, use a roller.
- Coverage varies; use primer for porous surfaces.
- Drying times:
- Touch: 2-3 hrs
- Full Cure: 7 days
- Clean tools with acetone immediately after use, or they won’t clean up later. Replace the sprayer after 2-3 applications.
