Free Shipping
Bundle Kit

Job on a Pallet - Commercial Epoxy System - ArmorPoxy II 2-Layer - Per Sq Ft - Low & STD VOC

  • Commercial grade 2-layer system
  • All materials included for installation Job on a Pallet
  • Strong chemical resistance
(No reviews yet) Write a Review
SKU:
MS-JOP-ARMOR-II
Minimum Purchase:
500 units
Selected Color is
Learn more about VOC type Read More
By the sq ft
$1.49

Product Details

FREE SHIPPING FOR ARMORPOXY II Job On A Pallet Kit!

ENTER TOTAL SQUARE FEET IN QUANTITY BOX WHEN ORDERING. PRICE IS PER SQUARE FOOT. RECOMMENDED FOR INDOOR USE ONLY.

  • Please note: ArmorPoxy II System is provided with a Colored Topcoat. If you plan to use FLAKES on your floor please specificy this on the NOTES section on checkout so we can adjust your order to a clear topcoat


Save up to 80% over a contractor-installed floor! Complete ‘Job on a Pallet’ Armorpoxy II 2-Layer, ready-to-install floor coating System. Military grade 2 layer coating system consists of everything you need to prep, apply, and install your floor on virtually any surface. Kits include the following: ArmorEtch concentrated etch solution, Armorpoxy II self-priming 2-part industrial epoxy, ArmorUltra Military-grade 2-part protective topcoat (pigmented, not inexpensive clear), UltraWear high wear non skid powdered metal wear additive, power mixers (for your drill), mixing bucket with liner, 18″ industrial roller frames, 18″ epoxy roller covers, spiked shoe bottoms (for walking on wet epoxy, complete instructions and full, unlimited free telephone support. Please note that other colors are available. Certain colors such as white, off white, red, and other highly pigmented bright colors are supplied with an additional coat of epoxy and will charge out at additional 29 cents/ sq ft. Please order the number of square feet of your project.

 Smaller orders may go Fedex Ground and not on a pallet for faster service. Lead time 2-3 days plus transit time. Additional colors, including all OSHA-Approved safety colors are available for base coats or line/hazard marking. Please contact us for any special requests, ‘decorative chip’ projects, high acid/chemical resistant projects, electro static dissipating, and any other type of special or unusual floor, or for floor repair special products to repair cracks and floor damage. For ‘fleck’ type floors please call us to order due to the many color combinations available 888-755-7361 9-5 EST M-F.

Key Features

  • Complete Installation Kit: Each "Job on a Pallet" kit includes all necessary materials and tools for a hassle-free installation, ensuring you have everything needed to achieve a professional-grade finish.
  • Strong Chemical Resistance: Formulated to resist a wide range of chemicals, this epoxy system protects surfaces from spills and stains, making it an excellent choice for garages, warehouses, and industrial facilities.
  • Customizable Colors: Choose from a diverse palette of colors, allowing you to create an aesthetically pleasing environment tailored to your specific needs. Custom colors can also be accommodated upon request.
  • Cost-Effective Solution: Save up to 80% compared to traditional contractor-installed flooring while enjoying a high-quality finish. This system empowers DIY enthusiasts and professionals alike to tackle their flooring projects with confidence.

Please note that recent changes in VOC laws in certain states require selection of the ‘Low VOC’ option (additional 19 cents/sq ft due to higher material costs since we have to substitute the standard Armorpoxy II with the Low VOC Armorpoxy II). Current states that these laws apply to are CA, CT, DE, ME, IL, IN, MD, MA, NH, NJ, NY, OH,PA,RI,VA. If your order is shipping to one of the “Low VOC Required” states listed here we cannot legally ship the standard VOC version to any of the above-noted states so you need to order the Low VOC version. Orders shipping to the states that require Low VOC will be manually adjusted and price corrected when your order is processed if the incorrect version was ordered.

Please note that the standard included coatings on this system contains ingredients which may result in traditional ‘paint smell’ while curing (2-3 days). Once cured, this odor dissipates.  If your project is being used in an area that these odors could cause concern, please contact our office to obtain a quote for a low/no odor alternative (prices will be somewhat higher than the standard system.)

Specifications

Dimensions

Container Size

Depends on order quantity

Product Thickness

8 mils

Details

Indoor / Outdoor

Indoor

Commercial / Residential

Commercial / Residential

Application/Installation Method

Rollers, squeegee, brush on

Coating Type

Epoxy primer, 100% solids epoxy, 2-part urethane topcoat

Kit

Yes

Min Optimal Temp

50 F

Max Optimal Temp

90 F

Sheen

Gloss

Substrate/Surface Material

Concrete

Time before Recoating

12-24 hours

DIY Friendly

Yes

Prevents Hot Tire Pickup

Yes

Resists Cracking

Yes

UoM

By the Sq Ft

Additional Info

Resources

Instructions
TDS Std VOC
SDS Std VOC
TDS Low VOC
SDS Low VOC
Comparison Chart Epoxy Kits: ArmorClad, ArmorPoxy II, ArmorUltra

Colors

Light Gray
Medium Gray
Dark Gray
Charcoal Gray
White
Off White
Tile Red
Light Blue
Tan
Brown
Blue
Green
Beige
Desert Tan
Khaki Tan
Traffic Yellow
Safety Yellow
Black

FAQ

Low VOC refers to that class of volatile organic compounds that are environmentally friendly and safe to use. In this case, low or no VOC flooring systems have a low solvent ratio and eliminate the threat of harmful fumes/odor.

We recommend waiting overnight between coats. Once the final coat is applied you can put your belongings back on the floor the following day when the floor is cured enough to walk on. Vehicular traffic and heavy equipment/storage units should wait 3-5 days before being brought back onto the floor.

Yes, construction dust, drywall paste, and paint splatters can affect the bond. Lime, which is an ingredient of concrete, floats to the top while it cures and must be treated. Scrape foreign substances from the floor and then clean the floor with the etching solution. This is a mandatory step. Skipping the prep step can cause failures.

Expansion joints can be left untreated or filled in using our crack repair epoxy putty, our flexible joint sealer or any other non-silicone based product. If using a product not manufactured by Armorpoxy please test for adhesion prior to coating. Contact your sales representative to discuss.

Yes. Pre-existing coatings need to be mechanically removed prior to use of the epoxy kit. The epoxy kit may form a bond on these surfaces (if left untreated) that is stronger than the bond of the old coating on the concrete. This could cause the old coating to pull away from the concrete, leaving an uncoated area. Leaving old coatings untreated can cause flooring failure due to entrapment of moisture. If you are unable to remove the old coating then please contact ArmorPoxy for recommendations for our NO PREP PRIMER on what to do next. Any previous coating remaining must be sanded or roughed up for proper adhesion.

Any coated surface, especially a high quality smooth surface, can be slippery when wet or when exposed to oils and grease. As a safety feature, we highly recommend that the anti-slip aggregate be added to the final coat.

You can choose from various colors, including Light Gray, Charcoal, Tan, and many more. Custom colors can also be requested.

Simply enter the total square feet needed in the quantity box when ordering; the price is calculated per square foot.

Videos

Installation Video

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

International

Opening Times & Location

9 - 5 EST Monday - Friday