Free Shipping
Bundle Kit

Job on a Pallet - Commercial Epoxy System - ArmorUltra 3-Layer - Per Sq Ft - Low & STD VOC

  • Commercial grade 3-layer system
  • All materials included for installation Job on a Pallet
  • Strong chemical resistance
(No reviews yet) Write a Review
SKU:
MS-JOP-KIT-PRICE-1
Minimum Purchase:
600 units
Selected Color is
Learn more about VOC type Read More
By the sq ft
$2.30 - $2.79

Product Details

FREE SHIPPING FOR ARMORULTRA Job on a Pallet Kits!!

ENTER TOTAL SQUARE FEET IN QUANTITY BOX WHEN ORDERING. PRICE IS PER SQUARE FOOT. 

  • Please note: Minimum ArmorUltra Job on a Pallet is 600 Square Feet. Recommended for indoor use only.
  • Please note: ArmorUltra System is provided with a Colored Topcoat. If you plan to use FLAKES on your floor please specificy this on the NOTES section on checkout so we can adjust your order to a clear topcoat

ArmorUltra is a Super-Duty Military Grade floor coating system. Used by car dealers, aircraft maintenance facilities, airplane hangars, restaurants, kennels, stores, and in other super high-use installations. Manufactured from the finest, most expensive ingredients available. Not available in home centers or paint stores. Unique 3 layer system of primer/epoxy/topcoat is at least 5-6 times thicker than standard floor paint (25-30 mils thick). Super heavy duty for the most demanding applications. Mid-layer 100% solids epoxy is applied with supplied calibrated squeegee.

Kits include the following: ArmorEtch concentrated etch solution, self-priming 2-part industrial epoxy primer, 100% solids high build ArmorUltra epoxy, ArmorUltra Military-grade protective topcoat (pigmented for better coverage – not clear), UltraWear high wear nonskid powdered metal wear additive, power mixers (for your drill), mixing bucket with liner, 18″ industrial roller frames, 18″ epoxy roller covers, calibrated notched squeegee for application of the high build epoxy, spiked shoe bottoms (for walking on wet epoxy), complete instructions and full, unlimited free telephone support.

Please note that if your shipping destination is in any of these states CT, DE, ME, IL, IN, MD, MA, NH, NJ, NY, OH,PA,RI,VA,  due to lower state-mandated low-VOC regulations, you need to order this version of this kit.   If your project is located in California, CA has even more stringent super low-voc regulations, some even by CA county, which will require the Ultra Low VOC version; please email or call our office for a quotation on the Ultra Low VOC version.

Smaller orders may go Fedex Ground and not on a pallet for faster service. Lead time 1-2 days plus transit time.

Additional colors, including all OSHA-Approved safety colors are available for base coats or line/hazard marking.  Please contact us for any special requests, ‘decorative chip’ projects, high acid/chemical resistant projects, and any other type of special or unusual floor, or for floor repair special products to repair cracks and floor damage. For ‘fleck’ type floors please call us to order due to the many color combinations available 888-755-7361 9-5 EST M-F.

Benefits

  • Customization Options: The option to choose from a wide range of colors, including vibrant hues and OSHA-approved safety colors, allows for customization to meet aesthetic preferences and compliance standards.
  • Environmental Compliance: The ArmorUltra system is designed with environmental considerations in mind. By offering both Standard and Low VOC options, it caters to various state regulations and minimizes environmental impact.
  • Customer Support: ArmorPoxy provides extensive technical support, ensuring customers can access assistance during the installation process. The unlimited free telephone support allows for quick resolution of any questions or issues.

Please note that the standard included coatings on this system contains ingredients which may result in traditional ‘paint smell’ while curing (2-3 days). Once cured, this odor dissipates.  If your project is being used in an area that these odors could cause concern, please contact our office to obtain a quote for a low/no odor alternative (prices will be somewhat higher than the standard system.)

Specifications

Dimensions

Container Size

By the sq ft

Product Thickness

23 mils

Details

Indoor / Outdoor

Indoor

Commercial / Residential

Commercial / Residential

Application/Installation Method

Rollers, squeegee, brush on

Coating Type

Epoxy primer, 100% solids epoxy,2 part polyurethane topcoat

Kit

Yes

Min Optimal Temp

50 F

Max Optimal Temp

90 F

Sheen

Gloss

Substrate/Surface Material

Concrete

Time before Recoating

12-24 hours

DIY Friendly

Yes

Prevents Hot Tire Pickup

Yes

Skid Resistant

Yes

Vehicle Ready Time

3-5 days

Resists Cracking

Yes

Resists Peeling

Yes

UoM

By the sq ft

Additional Info

Resources

Instructions
TDS Std VOC
SDS Std VOC
TDS Low VOC
SDS Low VOC
Case Study: Airplane Hangar | Off White
Case Study: Barn | Blue & Yellow Pattern
Case Study: Factory/Service - Light Gray
Case Study: Warehouse | White
Comparison Chart Epoxy Kits: ArmorClad, ArmorPoxy II, ArmorUltra

Colors

Light Gray
Medium Gray
Dark Gray
Charcoal Gray
White
Off White
Tile Red
Light Blue
Tan
Brown
Blue
Green
Beige
Desert Tan
Khaki Tan
Traffic Yellow
Safety Yellow
Black

Videos

Installation Video

FAQ

Yes, you can, ArmorUltra epoxy system comes in a ready-to-install job on pallet kit, which takes care of every little thing that you might require for epoxy flooring installation. However, larger jobs will go quicker with 2 or more people

The 3-layer system of primer, epoxy, and topcoat created by this kit is 5-6 times thicker than standard floor paint (25-30 mils thick).

Yes, no special surface prep is required if the additional coats are applied within 3-5 days. If a longer period goes by, then the area should be sanded lightly to create a rougher surface to which the ArmorPower epoxy kit can adhere to.

Yes. Pre-existing coatings need to be mechanically removed prior to use of ArmorPoxy coatings. The epoxy kit may form a bond on these surfaces (if left untreated) that is stronger than the bond of the old coating on the concrete. This could cause the old coating to pull away from the concrete, leaving an uncoated area. Leaving old coatings untreated can cause flooring failure due to entrapment of moisture. If you are unable to remove previous coating ArmorPoxy carries a a NO PREP PRIMER which acts as a primer/biding agent on your previous coating. Purchase this directly online or contact our sales team for more information.

Normally a slab needs 30 days to cure. It can be less or more depending on conditions. Perform a moisture test as indicated in the above instructions.

Low VOC refers to that class of volatile organic compounds that are environmentally friendly and safe to use. In this case, low or no VOC flooring systems have a low solvent ratio and eliminate the threat of harmful fumes/odor.

Traditional floor coatings work with a higher solvent-based ratio. Low VOC coatings have less solvent and hence lower evaporation or fume emission. Water-based or high solids coatings have VOC levels less than 250 g/l for standard coating and 340g/l for industrial coatings, which gives impressive results and less pollution.

The ArmorUltra system is recommended for indoor use only, providing the best durability and performance in controlled environments.

The ArmorUltra system is at least 5-6 times thicker than standard floor paint, achieving a thickness of 25-30 mils for enhanced durability.

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

International

Opening Times & Location

9 - 5 EST Monday - Friday