Supra Tile is the leading industrial interlocking floor tiles product player. Manufactured from the highest quality of industrial grade base material, supra tiles is virtually used everywhere including hangars, warehouse, plants, factories and garages. It is easy to install and have high resistant to chemicals and dirt.

Here’s an overview of how to install the Supra Tiles at home and what maintenance tips we need to consider at the beginning.

Installation Instructions

  • Once the tiles have been delivered they should be stored in the area of installation at the temperature between 60 to 70 degrees for a period of 48 hours.




Tools require

  • Tools required for installing tiles are Rubber Mallet, Jigsaw, measuring tape, chalk line, gloves, floor brush and Straight Edge or T-Square.




Floor Preparation

  • Areas that required should be cleared of all dust dirt and debris.
  • Appropriate self-leveling products should be mixed and prepared to use.


  • Spread the leveling product on the damaged line or floor until the surface levels.


  • Allow the area to dry from moisture content.

Installation Methods

  • To begin preparation for laying, you will need to measure the area and insert a chalk marker line.


  • Alternatively a straight line tool can be used for the same purpose.
  • The tiles are then laid out in stacks to facilitate the covering of the area.


  • We recommend open joint tiles to start in the center of the room and using the chalk line work out to meet the walls.
  • The tiles are then aligned and using a rubber mallet are interlocked together.


  • When fitting up to the walls it will be necessary to measure mark and cut the tiles accordingly to the wall with sharp knife or jigsaw.





Wraps and Edges

  • If you want to map out the profile edges and corners, it is also available to utilize at doorways.




Maintenance:

  • After installation, clean the tiles with a mop and mild cleaning solution to remove any dust or residue.
  • SupraTiles are low-maintenance and can be cleaned regularly with standard cleaning supplies.

This process results in a durable, long-lasting floor suitable for commercial or residential use