Color has been changed to

close

Buffing / Prep Pads

$10.00 - $24.99

Description

Black Stripping pad is recommend for prepping concrete, and for remediating the product after it has been installed. The product may only be removed and replaced up to 12 hours after install OR after 5 days of install. Black stripping pad is not recommended for epoxy as it is equivalent to 100 grit and will scratch […]

Description

Black Stripping pad is recommend for prepping concrete, and for remediating the product after it has been installed. The product may only be removed and replaced up to 12 hours after install OR after 5 days of install. Black stripping pad is not recommended for epoxy as it is equivalent to 100 grit and will scratch […]
Product code: BAL-BUFFPAD
Shipping Weight: 2 lbs.

Description

Black Stripping pad is recommend for prepping concrete, and for remediating the product after it has been installed. The product may only be removed and replaced up to 12 hours after install OR after 5 days of install. Black stripping pad is not recommended for epoxy as it is equivalent to 100 grit and will scratch soft materials.

Maroon SPP pad is used to prep and clean polished concrete and some epoxies depending on the presence of aluminum oxide.

Teal or Tan pad is used in the instance where epoxy is to be covered with BallistiX prior to epoxy chemically curing and should be used with Isopropyl 99% and followed with a dry red pad and a dry white to give epoxy gloss like finish and refine any micro scratches.

Red pad is most commonly used for basic cleaning of epoxy and other surfaces. It can be run dry or with Isopropyl 99%

White pad should be used dry on all applications to remove fine dust particles from polished and honed concrete pores and to give surfaces a final buff.

 

Standard kits

You may also like…

FAQ

What are the benefits of using BallistiX products?
BallistiX products offer protection against spalling, pitting, erosion, and chemical damage. This product line also prevents mold and mildew, is anti-graffiti, and enhances the color of the floor beneath it. After applying our product, your floors will also require less maintenance, and cleaning time can be cut by as much as 50%!
What colors are the Buffing and Prep Pads available in?
These pads are available in red, black, teal, and white. Each pad prepares a different surface and has a different cost.
How is BallistiX applied?
Most applications first require cleaning the surface with our 99% isopropyl alcohol on microfiber mop, and then spraying BallistiX on with a pump type sprayer and then a light microfiber mop. If you would like to additionally prepare your floor, you may use a floor buffer and the proper pad for the application sold by ArmorPoxy.
Which pad color should I buy?
If you need to prepare concrete, you should buy the black pad. The teal pad is suggested if you need to apply BallistiX on top of an epoxy floor. The red pad is used for the cleaning of epoxy floors, and and the white pad should be used to remove fine dust particles from polished and honed concrete pores, and to give surfaces a final buff.