Description

ArmorPoxy polyaspartic is a two component high solids polyaspartic clear topcoat with excellent chemical resistance, UV stability, abrasion resistance, hardness, used as basecoat or topocat over epoxy floor coatings, metallics epoxy, and more. The Polyaspartic comes packed in a 3.5 Gal Bucket with a metal mixer for ultimate convenience!  2 gallon size. Cures in 4-6 hours and can handle vehicle traffic in 48 hours. This high-solids coating has an extended cure time and still allows a quicker return to service than epoxy and urethane, Working time 15-20 minutes depending on temperature.  

High sheen finish that is resistant to UV rays and chemical damage, low maintenance, self priming, impermeable to mold, and other high moisture areas. It is ideally suited for both commercial and residential settings, aircraft hangars, manufacturing facilities, warehouses, retail stores, automotive showrooms, garage floors, or any high traffic area where an exceedingly resilient floor is desired.

Clear, high gloss, UV stable/does not yellow,  can be used outdoors. Can be used as a base coat, mid-coat (for adding decorative flecks), or a topcoat. Easily field tinted with available tint packs, please call or email for pricing. Coverage 300-700 square feet per 2 gallons depending on surface texture, porosity, etc. Typical Coverage averages 500 square feet per 2 gal set.

 Tint the polyaspartic with our tint packs. See tint packs here.  1 Pint (160z) of tint per 1.5-2 gallons of polyaspartic or 1 Quart (32 oz) per 3-4 gallons of polyaspartic

Each set comes with 1 gallon of Part A, and one gallon of Part B. Non skid additives can be added to or broadcast in as required for slip reduction. Larger sizes available for commercial projects, plus we can make into our Job on a Pallet Kits, call or email for info.

GC-ARMPOLY85-CM-CLEAR-2GAL