Armorpoxy SPGX is a unique one-part, (no mixing) super fast-curing Polyurea coating. Manufactured from high-performance industrial-grade resins SPGX outperforms virtually any one-part (and many 2-part) coatings on the market.
SPGX Polyurea has the advantages of paint, but with a performance that is equal to, or exceeds that of military-grade urethanes. Ideal for where dry times are an issue as SPGX cures in just 3-4 hours for foot traffic. Ideal for garages and other applications where users are unable to leave their possessions outside while awaiting the overnight cure times of multi-layer epoxy systems.
Unlike epoxies and urethanes which can discolor over time when exposed to UV, SPGX is totally non-yellowing and will maintain its color throughout its life. (Note that SPGX is not recommend for outdoor use, see our wide offerings of outdoor/exterior products)
SPGX comes in ‘clear’ color but can be field-tinted with matching pigment packs to either gray or tan colors. SPGX is an ideal coating for a ‘polished concrete look’ achieved by just rolling on a coat of non-pigmented SPGX. SPGX can also accept all of our non-skid additives such as Armorgrip to reduce slippage when wet or oily. SPGX is an ideal clear coat for stained and colored floors and can be used as a topcoat on virtually any coating.
SPGX can also be used for ‘fleck type’ floors by using a pigmented coat as the first coat and broadcasting colored flecks onto it and then coating with a second coat of SPGX in clear. SPGX is sold by the gallon, or incomplete kits in either medium or full fleck broadcast packages. Please see our SPGX ready to install kits.
SPGX also cures in lower temperatures than epoxies, can cure at temperatures down to 40 degrees F. Since SPGX is a one-part product that applies like paint, there is no waste since no mixing, and unused material can be kept in the can for re-use for up to a year.
- NO MIXING
- CURES AT LOW TEMPS
- OUTPERFORMS MOST OTHER COATINGS
- ECONOMICAL COST VS. PERFORMANCE
- EASY TO APPLY