Free Shipping
Bundle Kit

ArmorClad Epoxy Kit - Medium Broadcast - 300, 600, 900, 1200 Sq Ft Kit

  • High performance DIY epoxy coating kit
  • High gloss finish allows easy cleaning and maintenance
  • Superior durability against heavy traffic and impact
(No reviews yet) Write a Review
SKU:
ARMORCLAD-EPOXY-KIT
Selected Color is
Learn more about the differences of topcoats. Read More
Learn more about primer. Read More
$419.00 - $2,489.00

Product Details

Our 100% solids epoxy chemistry is far superior to low-grade cycloaliphatic epoxy formulations that others would like you to believe are ‘good’ or ‘better’. They are not. Only our Adaptive Molecular Technology is specifically designed for ease of use and a lifetime of performance for your garage or commercial epoxy floor. Never consider a kit sold at home centers, or from an online company with no real address or facility, as there are many brokers and basement resellers masquerading themselves as ‘manufacturers’.

ArmorClad has taken the finest, military-grade epoxy and packaged it into a kit that is easy to apply and will give many, many years of long life and magnificent shine to your floor. No other company offers a superior garage floor paint like ArmorClad.

ArmorClad is VERY easy to apply. Everything you need comes in our kits, and NO special skills are required. Just watch our installation video, read the instructions and that’s it!

ArmorClad is extremely virtually maintenance-free (keep it clean and free of tire debris of course) and is so easy to apply that it can be applied by a 6th-grader! No special skills or techniques are required to apply Armorclad, and we include in the kit everything you need for a terrific job.

ArmorClad is a 100% solids formulation. That means that there is nothing to ‘cure out’ of the epoxy so the thickness you apply it at is the thickness it dries to! It will  not shrink as it cures. Lower percentage solids epoxies, cycloaliphatic epoxies or single component epoxies cannot even come close to the technical performance of ArmorClad.

Design Your Floor With Our Floor Designer Tool 

Design Your Floor Now

Water-based ‘home center type’ floor epoxies are sub-standard and cannot possibly give the performance of ArmorClad. What will you do (and how will you strip off easily) your inexpensive water-based, thin, low cost floor coating when it fails (usually in far less than a year)?

ArmorClad comes in 4 standard sizes:1200 Sq Ft Bundle is for 4 car garages, 900 Sq Ft Bundle for 3 car garages, Master Kit for a 2 car garage up to 600 square feet, Add on Kit that is for a 1-car garage for up to 300 square feet. Kits can be combined to get close to your square footage and leave a reasonable safety factor.

All Master Kits include prep/etching solution, mixing bucket, mixer, cut in brush, rubber gloves, topcoat (optional), non skid additive, roller pad, decorative flecks, application squeegee, and complete instructions. Customer service and support is available M-F 9-5 EST with off hours email support 24 x 7.

ArmorClad comes in seven beautiful color and fleck combinations, or you can design your own with thousands of variables. 

Flake Color Combinations: 

  • Designer Gray: light gray, medium gray, dark gray flakes
  • Medium Gray: black, white, powder blue flakes
  • Desert Tan: ivory, green, navy, burgundy flakes
  • Khaki Tan: brown, tan, beige, coppertone flakes
  • Racing Blue: black, white, gray flakes
  • Beige: black, white, brown flakes 
  • Racing Red: black, white, gray flakes 

Key Features:

  • Easy Application: Everything needed for a successful application is included, requiring no special skills. Just follow the straightforward instructions and installation video.
  • Exceptional Durability: The 100% solid epoxy formulation creates a bond over ten times stronger than steel, ensuring a long-lasting, resilient finish.
  • Minimal Maintenance: Once applied, the ArmorClad floor is virtually maintenance-free, needing only regular cleaning to remove debris.
  • Flexible Sizing: Choose from kits for 300, 600, 900, or 1200 square feet, making it easy to find the right size for your space.
  • Custom Options: Select from seven stunning color and flake combinations or design your own for a unique look.

Experience the unmatched quality and performance of Armorpoxy’s ArmorClad Epoxy Kit and elevate your flooring to new heights!

ArmorClad also has available primers for floors that have been previously painted or coated or grinded and may be more porous, and upgraded 2 part military grade protective topcoat for garages that are ‘working garages’ and may see fuels and solvents. ArmorClad Kits come in 7 standard color mixes or can be customized to virtually any requirement or color choices.

Specifications

Dimensions

Details

Indoor / Outdoor

Indoor

Commercial / Residential

Commercial / Residential

Application/Installation Method

Roller, Squeegee, Brush On

Kit

Yes

Min Optimal Temp

50 F

Max Optimal Temp

90 F

Sheen

Gloss

Substrate/Surface Material

Concrete

Time before Recoating

24 hours

Dry To Touch Time

24 hours

Vehicle Ready Time

72 hours

DIY Friendly

Yes

Prevents Hot Tire Pickup

Yes

Resists Peeling

Yes

Skid Resistant

Yes

UoM

Qty

Working Time Epoxy

Epoxy 20-40 mins of working time

Working Time Topcoat

1pt - unlimited working time | 2 pt topcoat 1-2 hours

Broadcast Type

Medium Broadcast

Project Types

Garages, basements, warehouses, automotive, retail, bathroom

Additional Info

Resources

Instructions
Supplemental Flake Color Blends
Epoxy Base Color Chart
Case Study: Automotive Garage | Glow in Dark Flakes
Comparison Chart Epoxy Kits (ArmorClad, ArmorPoxy II, ArmorUltra)

FAQ

You should use primer if your floor has been previously coated, your floor has a non-smooth texture, if you have grinded or mechanically prepared your floor, or the floor has uneven porosity. Priming also extends coverage of the ArmorClad epoxy by up to 30%, allowing the epoxy to cover more surface area. We additionally recommend use of our ArmorClad Primer for beige and lighter base color projects.

Yes. Pre-existing coatings need to be mechanically removed prior to use of the ArmorClad epoxy kit. The ArmorClad epoxy kit may form a bond on these surfaces (if left untreated) that is stronger than the bond of the old coating on the concrete. This could cause the old coating to pull away from the concrete, leaving an uncoated area. Leaving old coatings untreated can cause flooring failure due to entrapment of moisture. If you are unable to remove the old coating then please contact ArmorPoxy for recommendations on what to do next. Any previous coating remaining must be sanded or roughed up for proper adhesion. In addition, previously coated floors should be primed with the optional ArmorPoxy Epoxy Primer to even out porosity and to assure an even finish. Contact ArmorPoxy to purchase. Failure to adhere to this can cause coating failure.

Normally a slab needs 30 days to cure. It can be less or more depending on conditions. Perform a moisture test as indicated in the above instructions

Yes, no special surface prep is required if the additional coats are applied within 3-5 days. If a longer period goes by, then the area should be sanded lightly to create a rougher surface to which the ArmorClad epoxy kit can adhere to.

Filling the cracks may yield a smoother, more aesthetically pleasing floor since any liquid coating will not fill in cracks 100%. If you have cracks, our Epoxy Crack Filler kit works very well for hairline and smaller cracks. Urethane or epoxy caulks may also be used. Another idea is to hide the cracks with the decorative chips. Do not use silicone-type caulks or fillers, as they will resist the epoxy.

We recommend waiting overnight between coats. Once the final coat is applied you can put your belongings back on the floor the following day when the floor is cured enough to walk on. Vehicular traffic and heavy equipment/storage units should wait 4-5 days before being brought back onto the floor.

Select from kits for 300, 600, 900, or 1200 square feet based on your area size. Combine kits for larger spaces while ensuring adequate coverage.

Choose from seven color and flake combinations, including Medium Gray, Designer Gray, Racing Blue, Desert Tan, Khaki Tan, Beige, and Racing Red, or customize your own colors.

Videos

Installation Video
Applying Basecoat in 30 Seconds!

Request a Quote, Request a Sample, Contact Support

We offer every client unlimited technical support and advice throughout the entire process of installing a new industrial floor coating, from the design phase all the way through installation. We are excited to help you create the industrial floor of your dreams!
Contact us today to explore the options available to you.

United States

International

Opening Times & Location

9 - 5 EST Monday - Friday