Armorpoxy Balcony/Deck Coating System
Armorpoxy Balcony Deck Membrane Coating (BDMC) is a unique, thick and flexible system designed to coat balconies, roof decks, pool and patio decks, walkways, sidewalk vaults, parking areas with conditioned spaces underneath them, areas that have movement due to temperature or vibration issues, and similar applications. BDMC can also be designed for heavy-duty parking lot and parking deck use.
BDMC is a multi-layer FLEXIBLE, thick, system designed to go over existing balconies, patios, and roof decks that have aged or are leaking. System design utilizes aggregate or decorative flecks for a naturally nonskid surface when wet. Designed for the harshest environments including commercial applications. Can be applied to wood, fiberglass, coated surfaces, concrete and similar substrates. The thick system hides surface imperfections and minor cracks (larger cracks and flashing areas should be filled first with Sikaflex Joint Compound/see below). Fully UV tolerant and designed for outdoor use. Low VOC for safe application in any application.
All BDMC layers are one-part products and do not require mixing. The first layer is the ‘membrane’ layer which is applied with a supplied calibrated notched squeegee. The special squeegee assures a thick, water-resistant, even coat. While wet onto this layer gets broadcast sand aggregate to ‘rejection’ so the entire surface is covered in aggregate Once the initial layer has cured, the excess aggregate is swept off, leaving a ‘sandpaper-like’ surface. Then, the final protective topcoat is rolled on. Alternately decorative flecks for a ‘terrazzo look’ or blended colored quartz can be broadcast for millions of design possibilities.
Balcony/Deck Membrane Coating System