1-888-755-7361 REQUEST A QUOTE Search
REQUEST A QUOTE REQUEST A SAMPLE
Login Cart
  • Home
  • Products
  • LIQUID GLASS – TRANSPARENT WATER RESISTANT PROTECTIVE COATING

Color has been changed to

close

LIQUID GLASS – TRANSPARENT WATER RESISTANT PROTECTIVE COATING

$209

Description

Liquid Glass is a two-component easy to use product which adheres to virtually ANY surface including glass, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, and aluminum. The product is great for outdoor applications where a clear and transparent waterproof coating is needed such as balconies, terraces, and patios.

Description

Liquid Glass is a two-component easy to use product which adheres to virtually ANY surface including glass, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, and aluminum. The product is great for outdoor applications where a clear and transparent waterproof coating is needed such as balconies, terraces, and patios.
Product code: 234152
Shipping Weight: 14 lbs.

Description

ISONEM LIQUID GLASS is a two-component easy to use product which adheres to surfaces like glass, mosaic, tile, porcelain, ceramic, marble, granite, natural stone, wood, concrete, screed, galvanized sheet, and aluminum. The product is great for outdoor applications where a clear and transparent waterproof coating is needed such as balconies, terraces, and patios. This product has virtually no limitations to its’ use and can even be tinted with Armor Tint Packs to achieve color.

Liquid Glass has high resistance to atmospheric conditions and has high chemical and abrasion resistance. It is even rated for vehice traffic! It can be used to prime, coat, and even topcoat over epoxies, urethanes, polyureas and polyapsartic coatings. It is not affected by U.V and outdoor weather conditions. It does not get yellow, fading or peeling off in time. 

TECHNICAL SPECIFICATIONS

Density A comp. (25°C, g/mL): 0,90 ± 0,10
Density B comp. (25°C, g/mL): 0,95 ± 0,10
pH (25°C): Not applicable (N/A)
Viscosity B comp. (25°C, mPa.s): 0 – 500
Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3
Adhesion strength by pull-off test (N/mm2): Rigid system without trafficking ≥ 1.0 N/mm²
Permeability to water vapour (m): 5 ≤  SD ≤ 50 CLASS II
Pot life (23°C): 50 – 60 minutes
Solvent: Organic solvent
Coverage: 400-500 sq/ft per 4KG Unit. 
Unit Size: 4Kg (app. 1.15 Gallons)
Coats: 1 minimum on tile but 2 can be applied. All other surfaces typically will need 2x coat minimum.
Recoat: Once floor is dry. Typically 2 hours dependent upon temperature and humidity.
Application Roller: High Density Foam Roller (Armropoxy carries this product). If applying to cemetitous subtrate using a NAP roller is okay but not preffered.
Cleaning: If applying a 2nd coat outside of 24 hours then cleanig the floor with acetone or denatured alcohol is reauired to ensure the surface is clean for recoat
Storgae Conditions: Store tightly closed in a dry and cool place away from heat and fire
 
USAGE AREAS
  • Glass, glass brick, mosaic, mosaic tile,
  • Tiles, ceramics, marble, granite, natural stone, porcelain surfaces
  • In press bricks,
  • On wooden surfaces
  • Balcony, terrace, bathroom, kitchen, stone-covered exterior.
  • Ceramic, glass mosaic covered ornamental pools.
  • It helps to prevent dusting on absorbent surfaces.

 

ISONEM Liquid Glass How To Install